ADD: 47-8 HuangZhou Road, Huangyan, Zhejiang,
China
English hot line:
0086-576-84020122
Arabian hot line:
0086-576-84020199
Chinese hot line:
0086-576-84020122
Cell Phone:
0086-13586002000
Fax:
0086-576-84020107
Web Site:
http://www.mega-machinery.com, http://www.megamould.com
E-Mail: hymega@gmail.com

Products
 
PET blow molder
MG-SS series automatic blow molding machines

MG-SS series automatic blow molding machines is the first blow molding machines which adopt separating system in China, Mega Machinery obtained the patents for its separating system which it reduces energy cost by up to 30 % with the international output of 1500BPH (one cavity blow molding machine). This series has 4 models which are MG-SS1500,MG-SS2500,MG-SS3500 and MG-SS4500.

MG SERIES REHEAT STRETCH BLOW MOLDING MACHINES

MG series reheat stretch blow molding machine is suited for small and five-gallon sized bottles. The most popular model in this series is the MG-3000; it fits to blow a wide variety of mineral water bottles, edible oil bottles, and detergent bottles made of PET. This series has a unique preform feeding system and bi-oriented blowing technology. It is the key to shaping high quality plastic bottles.

MG-HR HEAT RESISTANT REHEAT STRETCH BLOW MOLDING MACHINES

MG-HR heat resistant series stretch blow molder is presented for hotfillable PET bottles, such as fruit juices, isotonic drinks and RTD tea. The machines are special designed for heat set PET bottle. HR series adopts multiple blowing steps to reduce the level of PET residual stress.

Thanks the ideas of our president Mr. Cai Yuansen, hotfillbottles are able to withstand temperatures ranging from 90°C (hot filling bottles stored before filling ) up to 100°C (blowing and filling in line ) without any deformation at all. This is an incredible success in the hot-filling beverage domain.
MG-PP REHEAT STRETCH BLOW MOULDING MACHINES

MG-PP series stretch blow molding machine is dedicated to the production of pharmaceutical packaging. Today PP is used widely for pharmaceutical packaging, where PP's chemical resistance and suitability for steam sterilization prove a winning combination. PET blow molders, At Mega Machinery, after two-years' testing on BOPP, the second generation of BOPP blow molder is presented. According to the properties of PP material, the specialized preform oven makes sure of the quality of the final BOPP bottles.
MG-S REHEAT SERIES BOTTLE BLOW MOLDING MACHINE

MG-S series automatic stretch blow molding machine is designed on the base of MG-PET series stretch blow molding machine. Compared with the MG series, MG-S series separate the preform oven and blowing unit with a result of speedy blowing and higher output. As a linear PET stretch blow molding machine, its blowing speed can be measured up to the international standard with the capacity of 1500BPH with one cavity and 4300BPH with four cavities. MG-S adopts four-plate clamping unit so that improves the blowing speed and bottle output. PET blow molder, MG-S4000 can produce 1300 bottles more than MG-3000's at an hour. MG-S is controlled by PLC to keep the machine run smoothly and safely. PLC system is highly sensitive, any small trouble makes it give a signal and stop the machine if necessary, and as a result, the machine has a reliable performance and long service life.
>> MG-S1500
>> MG-S2500
>> MG-S3500
>> MG-S4500
SEMI-AUTOMATIC PET STRETCH BLOW MOLDING MACHINES

Mega Machinery has rich history of manufacturing semi-automatic PET stretch blow molding machines. After decades of technical update, some machines have been out of sight while some machines have been improved up to the latest level. With those years' operation, Mega Machinery has paid huge attention on Automatic Blowing Molding System, however semi-automatic blow molding machine, PET blow molders including MG-880, MG-90 and MG-5IIB still play a very important role in the plastic bottle market. MG-5IIB in particular is designed for LUHUA GROUP to blow peanut oil container. The machines are widely used to produce PET, PC, and PP container for carbonated drink, mineral water, edible oil, pesticide and cosmetic, and also for making jar and hot filling container. The container ranges from 5gallon bucket, lampshade to eyes drop bottle.
China PET blow molder Factoryblow molding machine

 
© 2010 China Zhejiang Taizhou HuangYan Mega Machinery Mold Co., Ltd. All Rights Reserved. Powerby China Products & China Manufacturers
Site Map, Site Map Friendly Links Add Your Links
Chinese Portuguese English Japanese German Arabic Spanish Russian French