Brief introduction:

Mega machinery Mold is China professional automatic blow molding machine manufacturer, supplier and maker. Mega Machinerys ' newest generation linear automatic blow molding machines are the MG-SS series. This series of machine was designed with two principles in mind. One, to lower the running cost for the bottle producer and two, provide easy operation. The MG-SS Series blow molding machines lowers your production costs so you can achieve maximum profits in your competitive bottling market, the MG-SS series reduces your energy expenses by up to 30% at a maximum output of 1600BPH. Thanks to our GM Mr. Cai Yunsen who developed the patented process for spacing the performs which maximizes the performance of the machine.

Overview

* PLC controller

MG-SS series PET blow molding machines adopts the famous Delta controller system. It integrates a self-diagnosis program, all warning information is shown through the friendly touch interface featuring an alarm system. Also, the controller shows the actual blowing speed during production.

* Cast mold platen with toggle clamping unit

Cast molded platens offer the longest service life, and enhance the stability of the machine. Engineering software analyzed and optimized the clamping system to guaranty the fastest possible moving speed and strongest clamping force. Also an additional high pressure compensation system is standard equipment and ensures the perfect clamping result.

* Infrared heating system

A Zoned and layered heating system with an advanced venting unit keeps the temperature accurate and uniform, this is the key to manufacturing high quality plastic bottles. The lamps can also be adjusted horizontally and vertically inside the specially designed heating oven. This ensures the distribution of heat meets the different shapes of the preforms .

* Stretching system

A double cylinder stretching unit is standard equipment and ensures the fastest possible stretching speed, and the longest possible stretching stroke. Linear motion guides provide ultra smooth movement and the lowest possible friction coefficient.

* Patented Separating system

The patented perform spacing system sets the preform adapters 120mm apart at the blowing station by mechanical function and also improves the moving speed.

* Preform feeding & bottle discharging system

Famous brand pneumatic parts guarantee the machines reliable performance and long service life while Linear motion guides improve the moving speed. Special grip units are designed to be changed easily.

Features:

1. Full automatic running with theoretical output capacity up to 4500 bottles per hour for 0.1L volume using four-cavity blow mold
2. Patented loading system carries the preform automatically with less moving parts.
3. Suitable to produce 0.1 ~ 2.5L Standard neck PET container
4. Advanced PLC control system with a use-friendly control panel
5. Built-in memory of the PLC saves all the sets of numbers required to produce different size bottles.
6. Multiple Reliable sensor systems monitors the machine's automatic function
7. Equipped with special designed air storage unit
8. Powerful heating unit with precision controller and convenient adjusting mechanism.
9. Cooling system that provides a perfect cooling result
10. Compact design that saves space
11. Simple installation & startup operation
12. minimal transfer space for the air distribution system.

Technical parameter

General Information		MG-SS1500	MG-SS2500/2600	MG-SS3500	MG-SS4500	MG-SS7000
Clamping Force		14T	25T	31T	34T	63T
Clamping Stroke		150MM	150MM	150MM	150MM	150MM
Max. Stretching Stroke		370MM	370MM	370MM	370MM	380MM
Bottom Moving Stroke		70MM	70MM	70MM	70MM	70MM
Number of Cavities		1 Cavity	2 Cavity	3 Cavity	4 Cavity	6 Cavity
Theoretical Output		1600 BPH	2500 BPH	3500 BPH	4500 BPH	5500BPH
Max. Mould Thickness		300MM	300MM	300MM	300MM	300MM
Space Between Tie Bars		300X380MM	400X380MM	500X380MM	640X380MM	800X400MM

Electrical System
Voltage Standard		380v/3PH/50Hz or special order
Number of Heating Zone		2 Sections	2 Sections	3 Sections	4 Sections	6 Sections
Total Power (MAX Loaded)		20KW	28KW	28KW	60KW	216KW

Container
Max. Container Volume		2.5L	2.5L	2.5L	2.5L	2.5L
Neck Diameter Range		32MM	32MM	32MM	32MM	15-40MM
Max. Container Diameter		35-110MM	35-110MM	35-110MM	35-110MM	35-110MM
Max. Container Height		400MM	400MM	400MM	400MM	400MM

Auxiliary System
Low Air compressor	8-10 Bar	8-10 Bar	8-10 Bar	8-10 Bar	8-10 Bar
High Air compressor	30 Bar	30 Bar	30 Bar	30 Bar	30 Bar
Air Dryer	2.0/30	3.0/30	3.0/30	3.0/30	6.0/30

Dimension & Weight
Blow molding machine	180x160x200CM	200x180x220CM	215x230x220CM	215x250x230CM	227x400x190CM
Preform Autoloader	140x105x200CM	150x120x250CM	150x120x250CM	150x120x250CM	220x150x250CM
Net Weight	2.6ton	3.8ton	4.5ton	6 ton	7 ton

Above bottles are only for reference, MG-SS series stretch blow molding machines also produce many other PET containers of various shapes and volumes. If you need more details of it, please feel free to contact us or click here for the flyer.

Download

Download

Download