 MG-S1500 automatic stretch blow molding machine
|
|
Brief introduction
MG-S1500 is one of the fastest liner blows molding machine, stretch blow molding machine in mainland of China by now. Thanks to our president and our research team, MG-S1500 reaches over 1500BPH for 350ML bottle with one cavity. It adopts four-plate type toggle clamping unit so that time for mold opening is shortened with a result of speedy blowing and high output. Besides, its baking tunnel is separated from the blow station, which increases the speed of bottle blowing and output. |
Overview
* Brief introduction
MG-S1500 is controlled by PLC. The whole process from preform feeding to bottle discharging is completed automatically with advantages of labor saving and no pollution. MG-S1500 consists of three main parts: preform loading system, Heater channel & blow station. MG-S1500 is designed by European CE symbol and measured up to ISO9001 standard, which guarantees the quality of the products, stretch blow molding machines.
|
|
* Control system
Together with HITECH Man-Machine Interaction (MMI) control panel with user-friendly, the whole control system presents super performance with precise control, convenient parameter setup, obvious display and reasonable memory.
|
* Pneumatic system
Pneumatic system provides the power for MG-S1500's movement. It is equipped with world famous high quality pneumatic components such as Festo from Germany, high precision, long service life and reliable performance are their highlights. Those pneumatic components suppliers' global service network provides the customer their prompt after-sale service locally for their pneumatic products used on MG-S1500.
|
|
* Sensor system
MG-S1500 adopts high quality imported sensor & switch system including proximity switch, photoelectric switch, and electronic magnet switch to keep production process going step by step and avoid any possible damage on machine.
|
|
* Heating system
MG-S1500 automatic stretch blow molding machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving. Infrared heating lamps placed onto three heating zone with 10 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform in different size. Each lamp’s horizontal position is adjustable to keep the machine flexible.
|
|
* Clamping system
MG-S1500 adopts four-plate type toggle clamping unit to provide powerful clamping force and increase the clamping speed. Apart from the four-plate type toggle clamping unit, there is a high pressure assistant clamping device that is special designed to get a firm clamping.
|
* Preform feeding & bottle discharging system
MG-S1500 automatic stretch blow molding machine is equipped with patented prefrom loading system, which consists of two manipulators: rectilineal manipulator and overturning manipulator. The rectilineal manipulator moves preform with neck up to the preform holder, after heating, the overturning manipulator grips heated preform and overturn 180°, put preform to blow station with neck down. After stretching and blowing, the bottle is taken off by overturning manipulator. The specially designed preform loading & bottle discharging system avoid possible damage to preform & bottle during transportation.
|
Features:
1. The baking tunnel and the blow station are separated to shorten time for molding opening and closing with a result of speedy blowing and high output.
2. Compact design saves space, lower investment and enhances competition.
3. Feeding system carries the preform automatically.
4. Advanced PLC control system with a use-friendly control panel.
5. Independent & simple linear running system.
6. Powerful heating unit with precision control and convenient adjusting device.
7. Equipped with special designed air storage unit.
8. Cooling system to get perfect cooling result.
9. Every movement is driven by cylinder instead of oil pump, no pollution.
10. Waste rate of finished bottle is less than 0.3%. |
Technical parameter
TYPE |
ITEM |
UNIT |
MG-S1500 technical data |
Container |
Product material |
/ |
PET/PE/PC |
Container volume |
L |
0.05-0.25 |
Theoretic output |
Psc/hr |
1200- 1440 |
Preform length |
M |
50-200 |
Max height of bottle |
M |
320 |
Molding |
Preform inner diameter |
mm |
15-60 |
Bottle diameter |
mm |
35-110 |
Max mold plate dimension
(L × W) |
mm |
260×380 |
Max mold thickness |
mm |
200 |
Air compressor |
High pressure compressor |
M ³ /Mpa |
1.1/3.0 ×1set |
Locking force |
KN |
150 |
Mold opening stroke
(adjustable) |
mm |
120-130 |
Low pressure compressor |
M ³ /Mpa |
= 1.25/1.0 |
Air dryer |
M ³ /Mpa |
2.0/30 |
Main machine electricity |
Power |
KW |
18 |
Voltage / frequency |
V/Hz |
380v/50hz |
Machine size and weight |
Main machine (L × W × H) |
M |
1.75 × 1.2 × 1.65 |
Main machine weight |
T |
2.0 |
Conveyor (L × W × H) |
M |
1.4 × 1.1 × 1.85 |
Conveyor weight |
T |
0.4 |
High pressure compressor
(L × W × H) |
Kg |
1.90 × 0.75 × 1.50 |
Low pressure compressor
(L × W × H) |
M |
1.85 × 0.70 × 1.50 |
High pressure air reservoir tank (D × H) |
M |
10.70 × 2.25 |
Air dryer (L × W × H) |
M |
0.65 × 0.50 × 0.95 |
Air filters |
Kg |
10 × 2ps |
Cooling water: cooling water recycling system can be used with its power of 8~10 liter per minute and 2~3 kilos water pressure |
Total power: 51.9 high pressure air volume (1m/min); low pressure air volume (1.2m/min) |
Safety |
Auto emergency alarm |
Safety inter-locking device |
|
Container
Some of the container produced by MG-S1500 is below:
|
Carbonated Drink Bottles |
Edible Oil Bottle |
Water Bottle |
Wine Bottle |
Pesticide Bottle |
Medicine Bottle |
Apart from the products above, MG-S1500 also makes many other PET bottles of various shapes and volumes. If more details needed in Mega and MG-S1500, please contact us mega.cathy@gmail.com. Here you will get more detailed information of MG series products and get a satisfied reply to your inquire. |
Operation
The standard operation of MG-S1500 linear stretch blow molding machine includes four steps as follow:
Step 1. Put the preform into preform container and the moving manipulator will take the preform to orientation units automatically.
Step 2. Load the preform with neck up to preform holder, and then preform is conveyed into baking tunnel.
Step 3. After heating, preform is conveyed into the blow station by overturning manipulator with preform’s neck down, then close the mold, stretch and blow under low pressure and high pressure, exhaust, open the mold.
Step 4. The finished bottle is taken off by overturning manipulator.
stretch blow molding machine, stretch blow moulding machine
|
|
