ADD: 47-8 HuangZhou Road, Huangyan, Zhejiang,
English hot line:
Arabian hot line:
Chinese hot line:
Cell Phone:
Web Site:,

MG-PP1200 automatic stretch blow molding machine
* Brief introduction

MG-PP 1200 automatic bottle stretch blow molding machine is controlled by advanced PLC, the whole bottle production from preform conveying to bottle taking off is completed automatically so that avoid possible pollution by operator. MG-PP 1200 is made up with three main parts: preform loading system, Heater channel & blow station. MG-PP 1200 is designed by European CE symbol and measured up to ISO9001 standard, which guarantees the quality of the products.
* Control system

The control system is the heart of MG-PP 1200 automatic blow molding machine. Together with HITECH Man-Machine Interaction (MMI) control panel with user-friendly, the whole control system presents super performance with precise control, convenient parameter setup, obvious display and reasonable memory.
* Pneumatic system

Pneumatic system provides the power for MG-PP 1200’s movement. MG-PP1200 is equipped with world famous high quality pneumatic components equipped such as Festo from Germany. High precise action, long service life and reliable performance are their highlights. Thanks to those pneumatic components suppliers’ global service network customer can take their prompt after-sale service locally for their pneumatic products use on MG-PP1200.
* Sensor system

MG-PP 1200 adopts high quality imported sensor & switch system including proximity switch, photoelectric switch, and electronic magnet switch to keep production process going step by step and avoid any possible damage on machine.
* Heating system

In consideration of PP property, MG-PP 1200 automatic stretch blow molding machine adopts specially designed long baking tunnel and infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving. Infrared heating lamps placed onto three heating zone with sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform of different size. Each lamp’s horizontal position is adjustable to keep the machine flexible.
* Clamping system

MG-PP 1200 adopts three-plate type toggle clamping unit to provide powerful clamping force. Apart from the three-plate type toggle clamping unit, there is a high pressure assistant clamping device that is special designed to get a firm clamping.
* Preform feeding & bottle discharging system

MG-PP 1200 automatic stretch blow molding machine is equipped with automatic prefrom loading system, which protect the neck of the perform from possible damages. The heated preforms are blown with neck up so as to ensure the quality of the finished bottle, and then shaped bottles will automatic fall down during the machine' movement.

* Operation
The standard MG-PP 1200 operation contains four steps following:
Step 1. Put the preform into preform container and the conveyer will take the preform to orientation units automatically.
Step 2. Load the preform with neck up to preform holder, and then preform is conveyed into baking tunnel.
Step 3. After heating, preform is conveyed into the blow station, then close the mold, stretch and blow under low pressure and high pressure, exhaust, open the mold.
Step 4. The finished bottle is taken off by automatic discharging system
China MG-PP1200 automatic stretch blow molding machine Factoryblow molding machine

© 2010 China Zhejiang Taizhou HuangYan Mega Machinery Mold Co., Ltd. All Rights Reserved. Powerby China Products & China Manufacturers
Site Map, Site Map Friendly Links Add Your Links
Chinese Portuguese English Japanese German Arabic Spanish Russian French