ADD: 47-8 HuangZhou Road, Huangyan, Zhejiang,
English hot line:
Arabian hot line:
Chinese hot line:
Cell Phone:
Web Site:,

MG-3000 automatic stretch blow molding machine

* Brief introduction

Advanced microcomputer controller controls MG-3000 automatic stretch blow molding machine, the whole bottle production from preform conveying to bottle taking off is completed automatically. MG-3000 is made up with three main parts: preform loading system, Heater channel & blow station. MG-3000 is designed by European CE symbol. At the same time, MG-3000 is up to ISO9001 standard, it guarantees the quality of the products.
* Control system

The control system is the heart of MG-3000 automatic blow molding machine. Together with HITECH Man-Machine Interaction (MMI) control panel with user-friendly, the whole control system presents super performance with precise control, convenient parameter setup, obvious display and reasonable memory.
* Pneumatic system

Pneumatic system provides the power for MG-3000's movement. World famous high quality pneumatic components equipped on MG-3000 such as Festo from Germany, specially designed high-pressure valve. High precise action, long service life and reliable performance are their highlights. Those pneumatic components suppliers' global service network provides the customer their prompt after-sale service locally for their pneumatic products used on MG-3000.
* Sensor system

MG-3000 adopts high quality imported sensor & switch system including proximity switch, photoelectric switch, and electronic magnet switch to keep production process going step by step and avoid any possible damage on machine.
* Heating system

MG-3000 automatic stretch blow molding machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving. Number of infrared heating lamps placed onto two heating zone with 9 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform in different size. Each lamp's horizontal position is adjustable to keep the machine agile.
* Clamping system

MG-3000 adopts three-plate type toggle clamping unit. Apart from the three-plate type toggle clamping unit, there is a high pressure assistant clamping device that is special designed to get a firm clamping.
* Preform feeding & bottle discharging system

MG-3000 automatic stretch blow molding machine is equipped with patented prefrom loading system, which protect the neck of the perform form damage and allow dimension of the prefrom to make a slight change without changing prefrom holder. The heated preforms are blown at neck up and ensure the quality of the finished bottle, shaped bottles will automatic fall down during the machine' movement.


The standard operation of MG-3000 stretch blow molding machine includes four steps as follow.
Step 1. Put the preform into preform container and the conveyer will take the preform to orientation units automatically.
Step 2. Load the preform at neck up to preform holder, and then preform is conveyed into baking tunnel.
Step 3. After heating, preform is conveyed into the blow station, then close the mold, stretch and blow under low pressure and high pressure, exhaust, open the mold.
Step 4. The finished bottle is taken off by automatic discharging system.
China MG-3000 automatic stretch blow molding machine Factoryblow molding machine

© 2010 China Zhejiang Taizhou HuangYan Mega Machinery Mold Co., Ltd. All Rights Reserved. Powerby China Products & China Manufacturers
Site Map, Site Map Friendly Links Add Your Links
Chinese Portuguese English Japanese German Arabic Spanish Russian French