ADD: 47-8 HuangZhou Road, Huangyan, Zhejiang,
China
English hot line:
0086-576-84020122
Arabian hot line:
0086-576-84020199
Chinese hot line:
0086-576-84020122
Cell Phone:
0086-13586002000
Fax:
0086-576-84020107
Web Site:
http://www.mega-machinery.com, http://www.megamould.com
E-Mail: hymega@gmail.com

Products
 
manual blow molding machine
There are total 6 series Reheat Stretch Blow Molding Machine, manual blow molding machine in Mega Machinery, which included MG series automatic blow molding machine, MG-HR heat resistant blow molding machine series, MG-PP series automatic blow molding machine, MG-S series automatic Blow Molding Machine, MG-SSseries automatic blow molding machine and semi-automatic series Blow molding machine.
MG-SS series automatic blow molding machines

MG-SS series automatic blow molding machines is the first blow molding machine, manual blow molding machines which adopt separating system in the world, Mega Machinery is patented with separating system which it reduces your engergy bill by up to 30 % with the international output of 1600BPH (one cavity blow molding machine). This series has 4 models which are MG-SS1500,MG-SS2500,MG-SS3500 and MG-SS4500.
MG SERIES REHEAT STRETCH BLOW MOLDING MACHINES

The MG series PET stretch blow moulding machine is suited for small and five-gallon sized bottles. The most popular model in this series is the MG-3000; it fits to blow a wide variety of mineral water bottles, edible oil bottles, and detergent bottles made of PET and PE. This series has a unique preform feeding system and bi-oriented blowing technology. It is the key to shaping high quality bottles.

MG-HR HEAT RESISTANT REHEAT STRETCH BLOW MOLDING MACHINES

MG-HR heat resistant series stretch blow molder is presented for hotfillable bottles, such as fruit juices, isotonic drinks and tea. PET heat resistant blow moulding machines are special designed according to the effect on PET material. HR series adopts multiple blowing steps to reduce the level of PET residual stress.

Thanks the ideas of our president Mr. Cai Yuansen, hotfillbottles are able to with stand temperatures ranging from 90°C (hot fill bottles stored before filling ) up to 100°C (blowing and filling in line ) without any deformation at all. This is an incredible success in the hot-filling beverage domain.

MG-PP REHEAT STRETCH BLOW MOULDING MACHINES

MG-PP series stretch blow moulding machine is dedicated to the production of pharmaceutical packaging and high temperature hot-fillable heat resistant bottles.Today PP is used widely for pharmaceutical packaging, where PP's chemical resistance and suitability for steam sterilization prove a winning combination. At Mega Machinery, after two-years' testing on PP, the second generation of PP blow molder is presented. According to the properties of PP material, the specialized preform oven makes sure of the quality when shaping bottles.

MG-S REHEAT SERIES BOTTLE BLOW MOLDING MACHINE

MG-S series automatic stretch blow molding machine is designed on the base of MG-PET series stretch blow molding machine. Compared with the MG series, MG-S series separate the baking tunnel and blowing unit with a result of speedy blowing and higher output. As a linear stretch blow molding machine, its blowing speed can be measured up to the international standard with the capacity of 1500BPH with one cavity and 4300BPH with four cavities. MG-S adopts four-plate clamping unit so that improves the blowing speed and bottle output. MG-S4000 can produce 1300 bottles more than MG-3000's at an hour. MG-S is controlled by PLC to keep the machine run smoothly and safely. PLC system is highly sensitive, any small trouble makes it give a signal and stop the machine if necessary, and as a result, the machine has a reliable performance and long service life.

SEMI-AUTOMATIC STRETCH BLOW MOLDING MACHINE
Mega Machinery h as rich history of manufacturing semi-automatic stretch blow molding machine. After decades of technical update, some machines have been out of sight while some machines have been improved up to the latest level. With those years' operation, Mega Machinery has paid huge attention on Automatic Blowing Molding System for Container , however semi-automatic blow molding machine including MG-880, MG-90 and MG-5IIB still play a very important role in the plastic bottle market. MG-5IIB in particular is designed for LUHUA GROUP to shape peanut oil container. This series is widely used to produce PET, PC, and PP container for carbonated drink, mineral water, edible oil, pesticide and cosmetic, and also for making jar and hot filling container. Those container ranges from 5gallon bucket, lampshade to eyes drop bottle.
China manual blow molding machine Factoryblow molding machine
 

 
© 2010 China Zhejiang Taizhou HuangYan Mega Machinery Mold Co., Ltd. All Rights Reserved. Powerby China Products & China Manufacturers
Site Map, Site Map Friendly Links Add Your Links
Chinese Portuguese English Japanese German Arabic Spanish Russian French