ADD: 47-8 HuangZhou Road, Huangyan, Zhejiang,
China
English hot line:
0086-576-84020122
Arabian hot line:
0086-576-84020199
Chinese hot line:
0086-576-84020122
Cell Phone:
0086-13586002000
Fax:
0086-576-84020107
Web Site:
http://www.mega-machinery.com, http://www.megamould.com
E-Mail: hymega@gmail.com

Industry News

MEGA offer best plastic packaging solution

Sep., 07, 2012

China Brew China Beverage trade show (or CBB), organized by China National United Equipment Group Corp., has today grown to be an icon event for the brewing and beverage industries in Asia-Pacific region. As a comprehensive presentation and communication platform for the global liquid food equipment and technologies, CBB has gained wide recognition throughout the world for its extensive coverage, popularity and brand appeal.

In this year’ CBB, Mega company will show you the newest 72 cavities preform injection mold, high speed hybrid electronic blow molding machine and blow molding machine special for 10 Litter oil bottle.

PET PREFORM MOLD


http://www.mega-machinery.com/pet_preform_mold.htm

The PET preform mold adopts the needle valve hot runner system design which is similar to the Husky, but the major part of the system created by mega’s C&D department. In order to make the PET martial flow evenly during the high temperature injection process, and to make an equal injection time and injection pressure on each cavity, mega applied the technology of put three small pieces of the 24 cavity hot runner plate together with the double layer runner cover plate. This type of hot runner design is a new creation in china, and possesses relatively high cost-performance compared to other abroad similar mold.

High Speed Hybrid Electric Blow Molding Machine


http://www.mega-machinery.com/mg_e.htm

The High speed hybrid electric blow molding machine which we showed on 2012 chinaplastic will be again presented on this CBB trade fair.

At present time, such new type of machine breaks the hour capacity limitation on linear blow molding industry in china. Compared with SIDEL’s SBO compact TM, SIPA’s SFL series, the hour-production speed of MEGA’s E6 has reached an international leading level, it maybe argued that the come out of this newest E6 fills a gap left by production speed on linear type blow molding machine in china. And what’s more, this series of machine adopted the newest technology of combining the electric and pneumonic as motor to largely increase production capacity on each single cavity. The patent high speed mold closing and opening unit and the innovation on heating process not only increase the capacity but save the cost by at last 20 percent.

The mold closing and opening structures in this new type machine adopted an all-closed loop servo motor with the functions of accurate position, instantly accelerate and optimized torque distribution. Applied with the inside program system to make the mold fast closing and opening. Compared with the traditional oil and pneumatic drive, the servo type enabled great improvement on mold closing and opening speed, what’s the foremost is that it will obviously decreased the average energy consumption.

In order to further reducing the energy consumption on the new E-series blow molding machine, MEGA designed an optional device of the small bottle pitch kit, which decrease the central distance on blowing unit from the original 120mm to 80mm to add more mold cavity to increase the machine capacity for small bottles. This new series of machine own features of smaller machine in size, faster production speed and lower energy consumption when compared with other competitors around the world.

Blow Molding Machine for 10L Edible Oil Bottle
http://www.mega-machinery.com/semi-automatic_stretch_blow_molding_machine.htm

Mega has a lot of design and producing experience in the huge volume bottle blow molding machine line. It’s a pity that it couldn’t be showed out in this fair because of the room limited, but a latest semi- automatic blow molding machine special for the 10 L oil bottle will be displayed in our booth. This new type of machine adopted the high pressure compensation system which is the same with MEGA’s automatic blow molding machine, so it has stronger instant clamping strength for common standard bottle design. As for blowing the 2 cavities 10 L PET bottle, this machine can insure a smaller clamping line on the bottle. A100 % pneumatic mold locking system adopted in this new type of semi-automatic blow molding machine can avoid the defect of the hydraulic oil leak and save energy consumption compared to original hydraulic oil type. In order to achieve a higher machine capacity, we advanced the blowing process and simplified the control step to make the machine output reach to 600 BPH for the 10 L 110 g bottle, which can be comparable to the automatic blow molding machine.

When it comes to the PET machinery industry both at home and abroad, European counties attach importance at creativity, which we can see a big develop trend form the statistic that half of the global export sales on plastic machinery industry has from European countries. Lots of famous company such as Sidel,Sipa,Krones etc. , whose manufacturing skill and design philosophy are all in a leading level on the world, and rising rapidly in those few years, especially in the aspect of electronic automatic control and machinery research with different kinds of independent innovations occurred every year. While in china, the different type of machinery was divided by different area, for example, Guangzhou province was major for the high speed rotary type, but zhejiang province is the major area for the semi- automatic and medium high speed linear type of blow molding machine. Frankly and practically speaking, on plastic machinery industry, Chinese producer is fall behind the Europeans in precise making on machine spare parts, manufacturing efficiency and energy consumption. However, you have to believe more efficient and economical Chinese made plastic packaging machinery will spring-up like baby bamboo after nourish of the spring rain, under the rapid growing of Chinese machinery in plastic packaging industry, which also showed us a big rising that can not be denied.

Mega company have to hold any developing opportunities and follow the industry working trend, to higher the professional technology, standardizing the company to an international level, and make the dream of being an international leading brand come to a fact by showing you exquisite craftsmanship, more reliable ability and better service. And we will struggle for a prosperous society and stronger national industry together with friends from different industries and different places.
Mega Company appreciate 2012 CBB organizer offered such a good opportunity to exhibit our product. Wish this trade fair has fruitful orders and welcome friends from all over the world to visit.

You are sincerely invited to visit MEGA, on booth 1E008. And you are welcome to have a look at our company website at www.MegaMachinery.com to know more detail about our blow molding machine and bottle molds.

----------------------------------------------------------------------------------------------------------

A new generation of hybrid electric blow molding machine was launched by MEGA

July.11, 2012

MEGA presented a new generation of hybrid electric blow molding machine--E4 in 2012 CHINA PLAS held in shanghai. It is said that this new type machine with a designed speed of 1800 bottles per hour for each cavity, and the 4 cavity machine can produce 7200 bottles per hour for the 500ml water bottle, thus regarded as the fastest linear hybrid blow molding machine in Asia,

MEGA's R&D department created and innovated a high effective bottle blow molding skill through learning advanced international technologies on this new E4. At present time, such new type of machine breaks the hour capacity limitation on linear blow molding industry in china. Compared with SIDEL's SBO compact TM, SIPA's SFL series, the hour-production speed of MEGA's E4 has reached an international leading level, it maybe argued that the come out of this newest E4 fills a gap left by production speed on linear type blow molding machine in china.

According to the introduction, MEGA spent 2 year's time on the innovation and study at the new type of machine based on the original E series automatic blow molding machine. The newest hybrid electric method was adopted to largely increase the single-cavity production speed on the E4. At the same time, it decreased production cost by 20% on PET bottle investment with the help of high-speed optimized clamping system and innovated heating system.

The mold closing and opening structures in this new type machine adopted an all-closed loop servo motor with the functions of accurate position, instantly accelerate and optimized torque distribution. Applied with the inside program system to make the mold fast closing and opening. Compared with the traditional oil and pneumatic drive, the servo type enabled great improvement on mold closing and opening speed, what’s the foremost is that it will obviously decreased the average energy consumption.

In the preform heating process, there is a new designed continuously preform heating technology, such type of advanced heating system will decreases the heating- energy requirement through recycled hot fan design in the oven, and also will infiltrate the radiant heat generated by the infrared lamps into the inside of the preform to guarantee a well temperature distribution, which will lower technical request on blow molding process of the next step. During preform heating process in the oven, the patent preform transfer technology helps the preforms rotate by the movement, so the new designed preform heating technology consume less energy compared with the traditional design. Nowadays, there are some optional devices for the new E4 machine. Such as PID, the heating zone system that have infrared temperature elements measure the temperature of the preform and automatically adjusted components intellectively notify and adjust the preform temperature and guarantee the least outside interference on the preform during heating process.

http://www.megamachinery.com/stretch-blow-molding-machines/economical-blow-moulding-machines.html

-----------------------------------------------------------------------------------------------------

Welcome to CBB 2012(Sep.19-22) Beijing,China (1E008)


Welcome to NPE 2012(April.1-5) Florida, USA (12026)


Welcome to The 111th China import and export Fair(April.15-19) Guangzhou, China(6.1F 14-15)


Welcome to CHINAPLAS 2012(April.18-21) Shanghai, China(W5D51 E5H15)

Welcome to Eurasia Packaging Istanbul 2011(SEP.15-18) Istanbul,Turkey (904B-1,Hall 9)

We hereby sincerely invite you to visit our booth at 904B-1,Hall 9,Eurasia Packaging Istanbul 2011(SEP.15-18). We will launch our latest products on the exhibition with novel design and sepcail structure. It would be our great honor if you will stop by our booth for further negotiations.

-------------------------------------------------------------------------------------- ---------------

Welcome to INTERPLAS & INTERMOLD 2011(JUNE.23-26) Bangkok,Thailand (L21,Hall 102,Intermold)

We hereby sincerely invite you to visit our booth at L21,Hall 102,Intermold during INTERPLAS & INTERMOLD 2011(JUNE.23-26). We will launch our latest products on the exhibition with novel design and sepcail structure. It would be our great honor if you will stop by our booth for further negotiations.

-------------------------------------------------------------------------------------- ---------------

Welcome to FISPAL TECNOLOGIA 2011(6.7-10) Sao Paulo,Brazil ANHEMBI PARQUE (A-15)

We hereby sincerely invite you to visit our booth at A-15 during FISPAL TECNOLOGIA 2011(6.7-10). We will launch our latest products on the exhibition with novel design and sepcail structure. It would be our great honor if you will stop by our booth for further negotiations. Looking forward for you visiting then.

-------------------------------------------------------------------------------------- ---------------

 

Welcome to CHINAPLS 2011(5.17-20) Guangzhou PAzhou internatinal Convention and Exhibition center(11.1L21 and 3.2C31)

We hereby sincerely invite you to visit our booth at 11.1L21 and 3.2C31 during CHINAPLS 2011(5.17-20).
We will launch our latest products on the exhibition with novel design and sepcail structure.
It would be our great honor if you will stop by our booth for further negotiations.
Looking forward for you visiting then.


 
© 2010 China Zhejiang Taizhou HuangYan Mega Machinery Mold Co., Ltd. All Rights Reserved. Powerby China Products & China Manufacturers
Site Map, Site Map Friendly Links Add Your Links
Chinese Portuguese English Japanese German Arabic Spanish Russian French