EB Series is the latest linear designed Electric Stretch Blow Molding Machine developed after years of R&D by Mega. Thanks to the variable pitch unit, synchronized heating system and high speed clamping design, the 10 cavity machine makes 0.5L water bottles at 12,000BPH. The Linear EB series costs 50% less than the equivalent rotary blower.
Precise controller
Large Touch Screen graphics interface with access to and storage of all the parameters for the control of the machine and heating and blowing processes. Self diagnostics and remote control with Mega customer support are also provided in the latest version.
Preform loading system
Thanks to a continuous preform loading system which is the same one used in Mega's rotary techonology , high speed preform loading requirements are met and are easy to change at the feeding wheel for different sized neck finishes.
Preform pre-heater
A 38.1 MM mandrel pitch makes the EB series consume less power. This is the key to reducing bottle production costs and increasing profit for the bottle producer. Efficient oven cooling and cross ventilation systems prevent crystallization, even for very thick perform walls.
Variable pitch system
A Servo motor driven variable pitch system synchronizes with the preform mandrels. This system reduces preform transfer times and ensures reliable variable pitch changing. Due to the wider preform distance after changing pitch, the machine is able to handle different size bottles.
Toggle designed clamping system
EB series machine adopts a uniquely designed clamping system with double sided pneumatic compensation to ensure the mold remains tightly closed during high pressure blowing and guarantees a consistent quality parting line on the bottle surface. No hydraulics are used for clamping the part, this helps the blow mold from wearing out over time and provides easy maintenance.
Options
PID system for heating zone
An Infrared thermometer detects the temperature of the preforms and automatically adjusts the temperature of the oven to the correct level. It avoids the influence of the temperature difference between day time and night time. Also, the system can have an additional lamp alarm unit, It sounds when it detects any broken or aging lamps.
Air Recovery system
We know most of the production cost comes from two factors, blowing the bottles and reheating the performs . In order to reduce the production cost for the bottler producer, Mega has introduced an Air recovery system. This system recovers up to 30% of exhausted High pressure air.
Air cooling system
Thanks to our GM Cai Yuansen , we have developed an air cooling system for hot fill PET bottles, after high pressure blowing, air cooling is introduced. This reduces the level of PET residual stress, and increases the rate of PET crystallization. After the air cooling process, the PET bottle can stand hot filling without deformation.